48243SB - 3-Way, Turned Brass Lamp Socket (E26) |
It is a good looking socket and can cost some real money to replace. We are all about being green and saving green so we will repair when it is an option. The other day a customer brought in this newer lamp with a screw collar type socket. They complained it stopped working and needed repair.
It looks good. No burns or worn places. The cord is polarized and in good shape. The only lamp part we can find wrong is the socket turn knob does not click. It just spins. Something inside the mechanical function of the socket has stopped working. We are going to fix this lamp, but only replace what is broken and not a penny more.
Most sockets snap together and have a PRESS marked on the socket shell to pry it from the socket cap. These sockets are a bit easier since they have a threaded collar connecting the cap and shell.
First, make sure the lamp is unplugged. Remove the harp from the harp base by pulling up the locking couplings and squeezing the tines together.
Then unscrew the collar on the socket. The collar hangs on the harp base while the socket shell is removed.
Pull the socket interior out from the socket cap. You might have to pull some slack from the cord or push extra cord up from the base. Unscrew the terminals holding the wire to the socket interior. (Some lamps might have a quick connect type socket interior. The wires on a quick connect should be cut close to the socket interior.) Remove the old worn socket interior.
Next, the new interior goes on the same way the old one came out. Simply revers the order of removal. The socket interior we are putting in this socket is a three-way socket to use with either 3-way bulbs or standard on/off bulbs.
Remember to properly connect the wires, the smooth wire connects to the brass screw and the ribbed wire connects to the nickel screw. If you pulled any slack up the socket for the interior, you will need to pull it back down the lamp. The harp is squeezed band clips back in the harp base.
Viola!! Complete repair in < 10 minutes and costs < $
No comments:
Post a Comment